2cb84df2f0906dcbbe0c0d3a55f4977f

Микросхема LM2907N/NOPB, Конвертор частота-напряжение [DIP-14]

Поставка электронных компонентов в Новосибирск

66,64 руб.

x 66,64 = 66,64
Сроки поставки выбранного компонента в Новосибирск уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №110-12 дней66,64руб.61,98руб.59,98руб.58,64руб.54,64руб.53,31руб.51,98руб.47,98руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №25-7 дней120,62руб.110,62руб.108,62руб.105,96руб.98,63руб.96,63руб.93,96руб.84,63руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №35 дней155,94руб.143,94руб.140,61руб.137,28руб.127,95руб.124,62руб.121,95руб.109,29руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №47-10 дней79,97руб.73,30руб.71,97руб.69,97руб.65,31руб.63,97руб.61,98руб.55,98руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №55 дней153,94руб.141,94руб.138,61руб.135,28руб.131,28руб.126,62руб.119,95руб.107,96руб.

Характеристики

LM2907N/NOPB, Конвертор частота-напряжение [DIP-14]The LM2907N/NOPB is a Frequency to Voltage Converter with a high gain op-amp/comparator designed to operate a relay, lamp or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection and its output swings to ground for a zero frequency input. The op-amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50mA. The two basic configurations offered include an 8-pin device with an input and an internal connection between the tachometer output and the op-amp non-inverting input. Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency to voltage and frequency to current operations are possible with supply voltage and a suitable resistor.

• Op-amp/comparator has floating transistor output
• Frequency doubling for low ripple
• Tachometer has built-in hysteresis with either differential input or ground referenced input
• Ground referenced tachometer is fully protected from damage due to swings above VCC & below ground
• Green product and no Sb/Br